VIBRATION DAMPER RUBBER METAL TYPE TP-A – WAISTED – NR – 55 SHORE – D 10/4.5MM TO 95/80MM – H 8MM TO 75MM – M3 TO M16
Fig:
9351
Norm:
ISO
Standard:
ISO 3302-1 (Rubber)
Type:
Type TP-A – Waisted
Diameter (D):
10/4.5 mm to 95/80 mm
Height (H):
8 mm to 75 mm
Thread (M):
M3 to M16
Thread length (l):
6 mm to 41 mm
Hardness rubber (Shore):
55 ±5% other on request
Material rubber:
NR (Para) Natural Rubber
Material steel:
St-37 Galvanized Steel or Stainless Steel AISI 304 (A2)
Temperature:
-30 °C to +80 °C
Markets:
Maritime / Offshore / Industry / Energy / Petrochemical
Function:
Subject to radial movement
Impact cushion
The target values mentioned in the table above are based on a static load. At (high) dynamic and variable load or high vibration frequencies, a reduction of the maximum values must be taken into account.
No rights can be derived from the information on this website.
Legend : D=large Ø, d=waist Ø, H=height, l=thread length, l1=thread length, M=thread size, Mat. A=type of rubber, Mat. B=Material metal components, Shore A °=Shore-A hardness of the rubber
| ARTICLE | TYPE | D | H | d | l | M | SHORE A ° | Material A | Material B |
| 93510001 | TP-A | 10 | 8 | 4,5 | 6 | M 3 | 55 ±5 | NR | St37 |
| 93510002 | TP-A | 10 | 8 | 4,5 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510003 | TP-A | 10 | 10 | 8 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510004 | TP-A | 15 | 15 | 12 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510005 | TP-A | 15 | 15 | 8,5 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510006 | TP-A | 20 | 30 | 12 | 18 | M 6 | 55 ±5 | NR | St37 |
| 93510007 | TP-A | 20 | 15 | 14 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510008 | TP-A | 20 | 19 | 14 | 18 | M 6 | 55 ±5 | NR | St37 |
| 93510009 | TP-A | 20 | 30 | 14 | 10 | M 4 | 55 ±5 | NR | St37 |
| 93510010 | TP-A | 25 | 20 | 18 | 23 | M 8 | 55 ±5 | NR | St37 |
| 93510011 | TP-A | 25 | 20 | 20 | 18 | M 6 | 55 ±5 | NR | St37 |
| 93510012 | TP-A | 30 | 25 | 18 | 15 | M 6 | 55 ±5 | NR | St37 |
| 93510013 | TP-A | 30 | 20 | 22 | 23 | M 8 | 55 ±5 | NR | St37 |
| 93510014 | TP-A | 30 | 20 | 25 | 23 | M 8 | 55 ±5 | NR | St37 |
| 93510015 | TP-A | 40 | 48 | 20 | 23 | M 8 | 55 ±5 | NR | St37 |
| 93510016 | TP-A | 40 | 30 | 25 | 20 | M 8 | 55 ±5 | NR | St37 |
| 93510017 | TP-A | 40 | 30 | 33 | 20 | M 8 | 55 ±5 | NR | St37 |
| 93510018 | TP-A | 50 | 30 | 42 | 28 | M10 | 55 ±5 | NR | St37 |
| 93510019 | TP-A | 55 | 45 | 44 | 20 | M 8 | 55 ±5 | NR | St37 |
| 93510020 | TP-A | 57 | 45 | 25 | 20 | M 8 | 55 ±5 | NR | St37 |
| 93510021 | TP-A | 57 | 45 | 44 | 28 | M10 | 55 ±5 | NR | St37 |
| 93510022 | TP-A | 57 | 44 | 45 | 28 | M10 | 55 ±5 | NR | St37 |
| 93510023 | TP-A | 60 | 60 | 49 | 28 | M10 | 55 ±5 | NR | St37 |
| 93510024 | TP-A | 70 | 53 | 45 | 28 | M12 | 55 ±5 | NR | St37 |
| 93510025 | TP-A | 95 | 75 | 80 | 41 | M16 | 55 ±5 | NR | St37 |