9412 | Open Spring Mounting Type OSB, OSS & OS25

OPEN SPRING MOUNTING – TYPE OSB, OSS & OS25 – DEFLECTION 20 / 29 MM – LOAD 10 / 2300 KG

This unique range of Open Spring mountings uses integral rubber end fixing of the springs which sets them apart from all other designs. Larger capacity open spring mountings use rubber grommets and base pads to ensure no direct metal path between the machine and the seating, thus enhancing high frequency noise isolation.

Originally designed for use with Type IPF Inertia Pouring Frames, the OS mountings are now widely used to isolate vibration from every conceivable type of rotating and reciprocating machine. Where control of transient motion is required Open Spring mountings can be used in conjunction with our Viscous Dampers Type SFD.

Fig:

9412

Class & Approvals:

LR / UKAS

Rated load (kg):

10 – 2300 kg

Bolt dia:

M8 – M24

Deflection at rated load:

20 – 29 mm

HD Bolts:

M6 – M16

Machine speeds:

300 up to 2000 rpm

Efficiency %:

15 mm defl 68,7 – 98,5 / 25 mm defl 34,0 – 99,1

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Frame:

All steel components are Zinc plated

Application:

Axial and Centrifugal Fans / Air Handling Units /
Pipework / Pumps / Generating sets / Compressors

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9411 | Open Spring Mounting Type OS50, OS60, OS75 & OS100

OPEN SPRING MOUNTING – TYPE OS50/60/75/100 – DEFLECTION 50 / 100 MM – LOAD 100 / 2300 KG

Originally designed for use with Type IPF Inertia Pouring Frames, the OS Mountings are now widely used to isolate vibration from every conceivable type of rotating and reciprocating machine. Where control of transient motion is required Open Spring Mountings can be used in conjunction with our Viscous Dampers Type SFD.

For applications requiring bolting down, the rubber seating pad and grommets ensure that there is no direct metal path between the machine and the seating, thus enhancing the high frequency noise isolation.

Fig:

9411

Class & Approvals:

LR / UKAS

Rated load (kg):

100 – 3500 kg

Bolt dia:

M16 – M24

Deflection at rated load:

50 – 100 mm

HD Bolts:

M12 – M16

Machine speeds:

300 up to 2000 rpm

Efficiency %:

50 mm defl 75,2 – 99,5 / 100 mm defl 89,0 – 99,8

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Frame:

All steel components are Zinc plated

Application:

Axial and Centrifugal Fans / Air Handling Units /
Pipework / Pumps / Generating sets / Compressors / etc.

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9431 | Enclosed Spring Mounting Type ES and ECS

ENCLOSED SPRING MOUNTING – TYPE ES & ECS – DEFLECTION 20/ 50 MM – LOAD 10 / 1400 KG

A unique range of mountings designed primarily for building services applications where the control of low frequency vibration and noise emanating from mechanical plant is of paramount importance.

The benefits of a combined rubber and steel housing for the spring have helped establish the ES and ECS mountings as industry standards accepted by specifiers, equipment manufacturers and mechanical services installers alike.

Fig:

9431

Class & Approvals:

LR / UKAS

Rated load (kg):

10 – 1400 kg

Bolt dia:

M8 – M16

Deflection at rated load:

15 – 50 mm

HD Bolts:

M6 – M12

Machine speeds:

300 up to 2000 rpm

Efficiency %:

15 mm defl 68,7 – 98,5 / 50 mm defl 75,2 – 99,5

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Frame:

All steel components are Zinc plated

Application:

Axial and Centrifugal Fans / Air Handling Units / Pipework / Rotary and Multi-Cylinder Compressors
Chillers and Cooling Towers
Isolation of Sensitive Equipment

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9219 | Wrap Seal Repair Kit

WRAP SEAL, REPAIR BETTER, QUICKER AND SAFER

8 pcs. Wrap Seal Repair Kit for pipe leaks

Wrap Seal is a polyurethane resin impregnated fibreglass role, used to repair weakened, damaged or even leaking pipes and tanks.

Repairs can be carried out within minutes without special knowledge or tools. The resin hardens within 20 – 30 minutes, depending the ambient temperature.

It sticks to almost any material, like most metals and plastics and even to concrete.

  • 4 pcs. fiberglass roll 2” x 6’ (50mm x 1,8m)
  • 2 pcs. fiberglass roll 4” x 12’ (100mm x 3.6m)
  • 1 pcs. Underwater Epoxy Stick
  • 1 pcs. Ultra-Sealing Tape
  • Documentation and instruction

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9218 | UNI-REP Coupling Repair Kit

UNI-REP COUPLING, REPAIR BETTER, QUICKER AND SAFER

UNI-Rep couplings are non-restraint repair couplings. They are used to connect and/or seal damaged metal and plastic pipes. Featuring “cut flanges” on the underside of the fitting, this type of coupling can be easily pulled around a leaking pipe to seal a fracture. Once wrapped around the pipe, the fitter then goes about installing the coupling in the same manner as any other UNI-Coupling model. They enable repairs to be carried out easily, quickly and safely without the need to dismantle the pipes.
The UNI-Rep couplings are suitable for emergency repairs in buildings and industrial units to avoid costly reinstatement work caused by water damage.

  • 2 pcs. 1-S-R-W5-N-29.0-32.0 mm
  • 2 pcs. 1-S-R-W5-N-39.0-43.0 mm
  • 2 pcs. 1-S-R-W5-N-47.5-52.5 mm
  • 2 pcs. 1-S-R-W5-N-58.0-64.0 mm
  • 2 pcs. 1-S-R-W5-N-72.0-80.0 mm
  • 2 pcs. 1-S-R-W5-N-88.0-96.0 mm
  • Documentation and instruction

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9215 | UNI-Combigrip

UNI-COMBIGRIP AXIAL RESTRAINT COUPLING – EPDM / NBR – PN6 / PN16 – 39MM / 640MM

UNI-Plastgrip couplings are used to connect plastic pipes to plastic pipes. The specially designed plastgripring with its distinctive cut teeth that engages into the plastic pipe without damaging the surface of the plastic pipe.

Fig:

9215

Class & Approvals:

LR / DNV / DVGW / ABS / BV / RINA / RS / KR

Quality:

W5 (standard), W2 (on request)

Torque rate (Nm):

25 – 160 Nm

Size:

39 mm – 640 mm

Working Pressure:

PN6/PN16 – PN2,5/10

Temperature:

-30 °C up to +180 °C

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Medium:

Water / Gas / Petroleum / Helium

Pipe Material:

Steel / Cast Iron / PE / PVC-C / PVC-U / ABS / PP / PB

Gripring:

2 Axial Restraint Rings ( 1 Gripring, 1 Plastgripring )

Sealing:

EPDM & NBR (viton/silocone on request)

Operations:

Accommodates angulation, vibration and vacuum

Application:

New installations and retrofit, building, ship or process plant

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9214 | UNI-Plastgrip

UNI-PLASTGRIP AXIAL RESTRAINT COUPLING – EPDM / NBR – PN6 / PN16 – 39MM / 640MM

UNI-Plastgrip couplings are used to connect plastic pipes to plastic pipes. The specially designed plastgripring with its distinctive cut teeth that engages into the plastic pipe without damaging the surface of the plastic pipe.

Fig:

9214

Class & Approvals:

LR / DNV / DVGW / ABS / BV / RINA / RS / KR

Quality:

W5 (standard), W2 (on request)

Torque rate (Nm):

25 – 160 Nm

Size:

39 mm – 640 mm

Working Pressure:

PN6/PN16 – PN2,5/10

Temperature:

-30 °C up to +180 °C

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Medium:

Water / Gas / Petroleum / Helium

Pipe Material:

PE / PVC-C / PVC-U / ABS / PP / PB

Gripring:

2 Axial Restraint Rings ( 2 Plastgriprings )

Sealing:

EPDM & NBR (viton/silocone on request)

Operations:

Connect plastic pipes to plastic

Application:

New installations and retrofit, building, ship or process plant

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9213 | UNI-Flex

UNI-FLEX NON RESTRAINT COUPLING – EPDM / NBR – PN6 / PN25 – 21 / 2090 MM

UNI-Flex pipe couplings are used for connecting restrained pipes. Both metal and plastic pipes can be connected safely and quickly and the coupling range is a high performance product range that allows pipe angulation, expansion and contraction. With UNI-Flex pipe couplings sealing reliability is also ensured under the condition of gaps between pipe ends that are compensated.

Fig:

9213

Class & Approvals:

LR / DNV / DVGW / ABS / BV / RINA / RS / KR

Quality:

W5 (standard), W2 (on request)

Torque rate (Nm):

3 – 80 Nm

Size:

33 mm – 172 mm

Working Pressure:

PN6/PN25 – PN2,5/16

Temperature:

-30 °C up to +180 °C

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Medium:

Water / Gas / Petroleum / Helium

Pipe Material:

Steel / Cast Iron / PE / PVC

Gripring:

N.A.

Sealing:

EPDM & NBR (viton/silocone on request)

Operations:

Repairing connections with metal and plastic pipes

Application:

Water authorities, civil engineers and building contractors

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9212 | UNI-Rep

UNI-REP REPAIR COUPLING – EPDM / NBR – PN6 / PN25 – 33MM / 2090MM

UNI-Rep couplings are non-restraint repair couplings. They are used to connect and/or seal damaged metal and plastic pipes. Featuring “cut flanges” on the underside of the fitting, this type of coupling can be easily pulled around a leaking pipe to seal a fracture. Once wrapped around the pipe, the fitter then goes about installing the coupling in the same manner as any other UNI-Coupling model. They enable repairs to be carried out easily, quickly and safely without the need to dismantle the pipes.

Fig:

9212

Class & Approvals:

LR / DNV / DVGW / ABS / BV / RINA / RS / KR

Quality:

W5 (standard), W2 (on request)

Torque rate (Nm):

3 – 80 Nm

Size:

33 mm – 172 mm

Working Pressure:

PN6/PN25 – PN2,5/16

Temperature:

-30 °C up to +180 °C

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Medium:

Water / Gas / Petroleum / Helium

Pipe Material:

Steel / Cast Iron / PE / PVC

Gripring:

N.A.

Sealing:

EPDM & NBR (viton/silocone on request)

Operations:

Repairing connections with metal and plastic pipes

Application:

Suitable for emergency repairs in buildings and industrial units

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.

9211 | UNI-Grip

CHECK VALVE (NON RETURN VALVE) FLANGED STRAIGHT SWING – NBR / EPDM – PN16 – DN50-DN150

The UNI-Grip pipe coupling is designed to replace the need for flanging, welding, pipe grooving and pipe threading by providing a quick and easy solution to joining plain-end pipe. This is possible due to the anchoring ring with conically stamped teeth that indents into the pipe’s surface (steel, stainless steel or cast iron) and provides safe and strong axial restraint.

Fig:

9211

Class & Approvals:

LR / DNV / DVGW / ABS / BV / RINA / RS / KR

Quality:

W5 (standard), W2 (on request)

Torque rate (Nm):

7 – 160 Nm

Size:

19 mm – 745 mm

Working Pressure:

PN6/PN70 – PN2,5/16

Temperature:

-30 °C up to +180 °C

Markets:

Maritime / Offshore / Industry / Energy / Petrochemical

Medium:

Water / Gas / Petroleum / Helium

Pipe Material:

Steel / Cast Iron

Gripring:

2 Axial Restraint Rings

Sealing:

EPDM & NBR (viton/silocone on request)

Operations:

Accommodates angulation, vibration and vacuum

Application:

Replace for Flanging / Welding / Pipe grooving / Pipe threading

No rights can be derived from the information on this website and our documents. Information can be manufacture dependent.